Monday, May 15, 2017

TP-Link AC3200 Wireless Tri-Band Gigabit Router (Archer C3200) Drivers - Firmware Download

TP-Link AC3200 Wireless Tri-Band Gigabit Router (Archer C3200) Drivers - Firmware Download

TP-LINK Archer C3200 Drivers - Firmware Download Review - TP-Link Archer C3200 in size 200 × 200 × 39 mm weighing more than 700 g. complete the power supply to the router — he has not known the "form factor, weighs more than a quarter of a kilo and produce 60 watts. Attached is a short power cord can be easily substituted as PSU mounted IEC 60320 C14 connector standard.

One of the faces of the power supply unit has a bright-blue led Strip. You can't disable it, not like bright blue LEDS in the same router. To disable their separate buttons on the front panel, and in addition, you can configure it automatically switches itself off certain hours.

All this power PSU is required to provide three radio with their own CPU and CPU. Of course, all this is good warm while working is very real, so that the router chassis almost entirely littered with ventilation holes. Need to correct all the chips and cold places and causes an increase in the size and weight of the hull the model all based on Tri-Band Broadcom solutions. So Archer C3200 is not it better to put in the corner of a dusty without normal air flow. However, because this design will look good and in a prominent place. The router can be hung on the wall, though due to the location of the antenna may not be the best solution-they can only lean on 90 with minor degree compared to the top of the router.

The hardware section of the claim is not proven platform with good performance. Unfortunately, all of this power is really pointless. Why? Since the TP-Link is true to itself, and any global change the firmware there. In addition, when compared with those same archers C9, C3200 lost useful features intelligent classification and prioritization of traffic. The new features of the above mentioned disabling the scheduled indicators and SmartConnect function that should be most allocate between wireless clients and access points that really has all the solutions that are based on a Tri-Band Broadcom. In addition to other useful is the built-in IPSec client. Get acquainted with other firmware can official emulator.

Indeed, all this process arises from the need for the correct operation of the dynamic range selection (DFS) to Wi-Fi devices do not interfere with radar and satellite equipment. Especially in the upper range of the U-NII, the terms of use that differ markedly from region to region. In our case, one of the 802.11 ac-dot can work with tv with 36-64, and the second with 100-128. to test the settings manually selected channel 36 and 100, and also specified the width of 80 Mhz, range 5 Ghz was almost empty. In the lower range of average proved little C3200 faster C9, and here at the top of the slower. With regard to the range of 2.4 Ghz, the router could not engage in a 40 Mhz channel, although the settings you specified exactly this width. Just like last time, there is an asymmetry is the velocity in the direction of the router to the power adapter is higher than otherwise.

In the settings of the router that allows encryption WPA2, WPS function is disabled, but intelligent connect is not involved, as a wireless client is the only one that is still in use. Options for reducing interference from USB 3.0 in the firmware, so that the tests are conducted without storage or printer. All other settings are left unchanged. For testing we used the standard stand. The first configuration: Intel Core i7 2600 k, 12 Gb RAM, ASUS PCE-AC68 (in the table marked as A), Windows 7 SP1 x 64. The second configuration: Intel Core i7-4700HQ, 12 Gb RAM, 10 x 64 Windows with all updates Realtek RTL8168 (table designated as R).

The speed of the connection cable to the network proved to be slightly higher than Archer C9. Direct connections PPPoE and stored at a rate of 900 Mbps, though, as expected, at the first duplex that proved both faster speeds of around 1.4 GB/s and the same 900 Mbit/s each. Separate settings to enable/disable the NAT hardware view, but, apparently, this feature is enabled by default. In the case of L2TP connections, you can rely on the speed of up to 260 Mbps, and PPTP is averaging up to 180 Mbps. in both cases, the duplex speed not higher than in the case of connections each way.

TP-LINK Archer C3200 Drivers Download Free - You can download many drivers, firmware and software. TP-LINK Archer C3200 in our blog, without direct to other sites, so you can save time, and also without viruses and malware.

TP-LINK Archer C3200 Specs :
  • Interfaces : 4 10/100/1000Mbps LAN Ports, 1 10/100/1000Mbps WAN Port, 1 USB 3.0 Port + 1 USB 2.0 Port.
  • Button : Wireless On/Off Button, Power On/off Button, LED On/off Button, WPS Button, Reset Button.
  • Dimensions (W X D X H) : 7.9 X 7.9 X 1.5 in. (200 X 200 X 39mm).
  • Antenna : 3 dual band Fixed antennas & 3 single band Fixed antennas.
  • External Power Supply : 12V/5A.
  • Wireless Standards : IEEE 802.11ac/n/a 5GHz. IEEE 802.11b/g/n 2.4GHz.
  • Frequency : 2.4GHz and 5GHz Band1/Band4.

TP-LINK Archer C3200 Firmware Installations/Update

  • How to upgrade the firmware version of TP-Link wireless router Link

TP-LINK Archer C3200 Firmware Update

TP-Link AC3200 Firmware
TP-Link AC3200 Archer C3200(US)_V1_160704 Download
Modifications and Bug Fixes :
  1. Optimized the transmit power for the clients just support 20MHz, when the 2.4GHz wireless channel bandwidth is set up as 40MHz on the web page.
  2. Improved the 2.4GHz  wireless channel automatic selection mechanism to avoid sideband.
  3. Improved the Parental Control function.
  4. This firmware is a Multi-language version, including English, German, Italian, French, Spanish, Dutch, Portuguese, Danish, Finnish, Norwegian, Swedish, TC, Vietnamese, Russian, Polish.
Bug Fixed:
  1. Fixed the bug that PPTP dial up may fail under some conditions.
  2. Fixed the bug that Mac clone function wouldn't work after restarting the device.

TP-Link AC3200 Firmware
TP-Link AC3200 Archer Archer C3200(US)_V1_160202 Download
Modifications and Bug Fixes :
  1. Optimized the transmit power for the clients just support 20MHz when the 2.4GHz wireless channel bandwidth is set up as 40MHz on the web page.
  2.  Improved the 2.4GHz  wireless channel automatic selection mechanism to avoid sideband.
Bug Fixed:
  1. PPTP dial up may fail under some conditions.
  2. Mac clone function wouldn't work after restarting the device.
  3. For Archer C3200(US)_V1

TP-LINK Archer C3200 Utility For Windows and Mac OS

USB_Printer_Controller_Utility_Mac Download
USB_Printer_Controller_Utility_Windows Download

TP-LINK Archer C3200 Tether Apps For Android and iOS

TP-LINK Archer C3200 Tether Apps For Android Playstore
TP-LINK Archer C3200 Tether Apps For Android AppStore

TP-LINK Archer C3200 Document

Manual
Archer C3200_V1_QIG_US PDF
Archer C3200(US)_V1_UG PDF


"Thanks a lot for his visit and Notify me when his link is dead and let me know when his drivers not working."

Artikel Terkait